Hydraulic nuts: Facilitating Bearing Installation and Adjustment

Hydraulic nuts HMV(C) ..E series Mounting bearings on tapered seats can be difficult and time-consuming. Using an SKF hydraulic nut (fig) facilitates easy and quick application of the high drive-up forces required for mounting bearings. All HMV ..E nuts are equipped with a quick connection coupling to fit the SKF hydraulic pumps.

• Wide size range, covering shaft diameters from 50 to 1 000 mm as standard
• Full range of inch threads available, series HMVC ..E – 1,967 up to 37,410 in
• Quick connection coupling can be fitted on the face or side of the nut, allowing the nut to be used in areas where space is limited
• Spare set of piston seals and Maintenance kit supplied as standard
• To assist nut threading, a tube of lubricant is supplied standard with all nuts from size HMV(C) 54E
• To facilitate easy nut threading, all nuts from size HMV(C) 54E are equipped with two tommy bars and four mating holes on their front face
• Nuts from size HMV(C) 94E are equipped with eyebolts, allowing easy handling
• Nuts from size HMV(C) 94E have the starting position of the thread indicated, facilitating easy matching of thread positions on both the nut and mating thread
• Special threads and sizes available on request

Bearing accessories | Adapter sleeves | Withdrawal sleeves | Lock nuts | Lock nuts with locking washer or clip | Lock nuts with locking screw | Lock nuts with integral locking device | Precision lock nuts with locking pins | Hydraulic nuts