Special Design Y-Bearings

In addition to the standard range, the following special insert bearings are available

• Y-bearings for high temperature applications
• Y-bearings with Solid Oil
• Y-bearings with special coatings
• Y-bearings with low friction seals
• Y-bearings with special grease fills.

These special bearings are designed for applications where operating temperatures may exceed the range for standard bearings; where conventional lubrication methods or lubricants cannot be used, or where smooth running is required is a key operational parameter.

Additional information about

• Y-bearings for high temperature applications



• Y-bearings with Solid Oil

can be found in the section “Engineering products”

• Bearings and bearing units for high temperatures
• Bearings and bearing units with Solid Oil

In the case of

• Y-bearings with special coatings
• Y-bearings with low friction seals
• Y-bearings with special grease fills

please contact the SKF application engineering service for detailed information.

Terminology | Y-bearings with grub screw locking | Y-bearings with an eccentric locking collar | Y-bearings with a tapered bore | Y-bearings with a standard inner ring | Y-bearings with a hexagonal or square bore | Special design bearings | Seals | Dimensions | Tolerances | Radial internal clearance | Cages | Grease fill | Speeds | Shaft tolerances | Rubber seat rings | Axial load carrying ability | Equivalent bearing load | Mounting and dismounting | Designations